ESL10

Standard Bolt

Slam Bolt

Type 1 Listed

All the ESL20 features are programmed from the keypad. The Expansion Modules provide convenient screw term-inal and slip spade connections for field wiring by the installer.

A/C Power can be connected to the ESL20 and ESL10 lock (with the ESLAC kit) or an Expansion Module (with the ESLTFMR kit). Wiring, conduit and attachment hardware is provided with all optional kits.

ESL10

Features:

• Replaces most mechanical combination locks. Easy installation and operation.
• Combination changes are fast and easy from the keypad.
• Factory Reset Combination for solving lost combinations without requiring expensive service calls.
• Two 9V-DC batteries in the keypad housing can be changed easily.
• Electronics are encapsulated within the lock and are sealed to prevent possible moisture related failures.
• Cable fits through a 1/2" spindle hole without cutting and re-crimping connector.
• Audible beep and flash from every keystroke gives maximum feedback to the user.
• New industrial “Soft Touch” membrane keypad is tough yet requires very low activation pressure.
• 15 minute Penalty Lockout after four incorrect entries protects against manipulation attempts.
• New patented dead-latched lock design with an internal relock device for maximum security.
• Lock “auto-locks” when boltwork is thrown to prevent safes from being left in a day lock position.
• Optional internal battery pack extends operation between battery changes.
• Slam Bolt version for locker applications.

ESL20

Additional Features:

• Time Delay Mode: Delays can be set from 1 to 99 minutes. Open period can be set from 1 to 9 minutes.
• Multiple User Mode: When enabled, one Master code and eight user codes are available with full supervisory control and code management.
• Dual Control Mode: When enabled, the lock requires two combinations to open for added security.
• Armored Car Override: When enabled, allows an armored car service to bypass Time Delay.
• External A/C Power: Provides power for unlimited use with battery power as backup.
• Control Port: Turn the ESL20 on/off with an Access Manager, Alarm System or
  other device.

Optional Expansion Modules:
Provides these additional capabilities on the ESL20:

• Duress (Silent Signal) Alarm Output. Provides relay output for alarm system connection.
• External connection for A/C power transformer on ESL20 and ESL10.
• External connection for control port.
• Provides for connection of one or two ESL20 locks.

Operating Instructions for ESL10
Operating Instructions for ESL20

Installed Options / Retrofit Kits